• Current Issue

    Bulk Distributor

Low profile filler accommodates bulk bags

A new low profile, combination bulk bag/drum filler from Flexicon allows filling of bulk bags and drums in low headroom areas.

Low profile combination bulk bag/drum filler from Flexicon allows filling of bulk bags or drums in limited headroom areas, and loading/unloading of pallets using a pallet jack.

When filling bulk bags, full-length forklifting tubes integral to the rear-post fill head allow incremental height adjustments secured with hitch pins to accommodate bags of all popular sizes, from 1000 to 1500 mm tall, and widths to 1150 mm. The filler is equipped with an inflatable bag spout seal, a feed chute dust vent, and a low-profile densification deck that de-aerates material in bags weighing up to two tonnes as they are being filled.

The unit can be switched to drum-filling mode in several seconds by positioning the swing-arm-mounted drum-filling chute under the fill head discharge port. The attachment has an adaptable seal to handle drums measuring up to 570 mm in diameter and 900 mm in height. When filling one drum, initiating a filling cycle delivers a programmed weight of material to the drum. When filling multiples, the feed chute automatically indexes after each drum is filled, reducing operator involvement to initiating the cycle and removing the palletised drums using a pallet jack or fork truck.

The filler is constructed of carbon steel with stainless steel material contact surfaces, and is available in all-stainless steel finished to industrial, food, dairy or pharmaceutical standards, and with material delivery systems integrated with upstream process equipment or storage vessels.

 

This entry was posted in Equipment & Technology, Industrial Packaging, News. You can post a comment.

Post a Comment

You must be logged in to post a comment.